Publikasi Dosen

Negative Pressure Gauge on a Suction Pump Equipped with MIT APP Inventor-Based Measurement Data Input and Storage

---

Research conducted by Muhaji, Bedjo Santoso, Putrono on the comparison of the effectiveness of two levels of suction pressure on oxygen saturation in endotracheal tube patients. The findings show that there is a significant effect of negative pressure on oxygen saturation. So that the use of the pressure value must be ensured that it is appropriate so as not to injure the patient. The accuracy and accuracy of the pressure value can be ensured by calibrating the suction pump with a calibrator, namely Digital Pressure Meter. From this case, a digital pressure meter module was created with an application. This tool serves to read the pressure value on the suction pump in real time. This tool was created with the aim of measuring negative pressure on a suction pump which is equipped with an application for inputting and storing measurement data based on the MIT App Inventor to make it easier for users to input tool identity and calibration results. To get results that are in accordance with the purpose of writing, using the study method to the library, the preparation stage, the design stage includes making software and hardware, then testing and measuring. Negative pressure measurement testing uses a Suction Pump as a measurement sample and uses 2 comparison tools, namely DPM4 and Manometer. Negative pressure testing was carried out 10 times at each measurement point, namely -10.6, -20, -30 kPa and -80, -150, -225 mmHg. After the measurements were taken, it was concluded that the module test compared to DPM4 obtained an accuracy of 99.09%, while the module test compared to the Manometer obtained an accuracy of 98.85%. Pressure measurement compared to DPM4 has 0.24% higher accuracy than pressure measurement developed with Manometer. This module is designed to be used for power calibration specifically for Suction Pump equipment. To make it easier to use the TFT nexion LCD.

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

001.43

Penerbit

Surabaya : Poltekkes Kemenkes Surabaya., 2022

Deskripsi Fisik

-

Bahasa

English

ISBN/ISSN

-

Klasifikasi

001.43

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

internet of things
HC-05
MPXV4115VC6U
Suction pump
Negative Pressure

Info Detail Spesifik

Publikasi pada Jurnal Teknokes; International: Rapid Review: Open Access Journal Vol. 15, No. 4, December 2022, pp. 252-261 e-ISSN 2407-8964; p-ISSN 1907-7904; kdag13012023

Pernyataan Tanggungjawab

-

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar